Electro-Voice - EV RE-2 Pro

The RE-2 Series Wireless Microphone System brings sophisticated professional features and is a completely programmable Frequency agile system with one-touch Auto-ClearScan™, operates over 28MHz (6 TV channels), XLR Mic or Line Level output and many other features.

4 RE-2 Receiver:

• Advanced ClearScan

EV patented, Advanced ClearScan technology allows quick, easy frequency setup. Channels are scanned and the clearest channels within the clearest preset groups are automatically selected.

Controls: On/Off, Set, Up, Down, Audio Line Level Output

Displays: Group/Channel, Frequency, Diversity, AF meter, RF meter

Connector Type: 1/4" Unbalanced

Connector Type: 3-pin XLR

Antennas: External 1/4 wave detachable

Audio Frequency Response: 50Hz - 15kHz +/- 2dB

Distortion (@ 1kHz, 40 kHz deviation): < 1 %

Diversity: Digital Posi-Phase™ True Diversity

Dynamic Range: > 100 dB

FCC Type Acceptance: Approved under Part 15

Number of channels: 1112 possible (programmable in 25kHz steps) per band

Squelch: Tone Code plus Amplitude

Case Material: Metal

Indicators LCD: Group, Channel, Frequency, AF Meter, RF Meter, Battery Level

Power Requirement: 12 V AC/DC 300mA

Wired/Wireless: Wireless

Finish: Non-reflecting Black

Dimensions (HxWxD): 43.7 x 190.5 x 150 mm (1.72" x 7.5" x 5.91")

EV ADP4 is an antenna signal and power distribution system that accommodates up to 4 Telex or Electro-Voice wireless microphone receivers. The system will distribute diversity signal and power with low loss using a single set of diversity antennas. The ADP4 eliminates the need for excess cable runs. Supports up to 4 systems

Distributes power and radio-frequency without loss

Maintains high signal-to-noise ratio

RF Frequency Range 600 - 780MHz

Attenuation / Gain Net Gain greater than 2dB

Operating Voltage 100-240VAC 50/60Hz

Specs:

HTU2 Handheld Transmitter:

Antennas: Internal 1/2 wave

Mic Type: Handheld

Power Requirement: 9V Battery

Wired/Wireless: Wireless

Finish: Non-reflecting Black

Case Material: High-Impact ABS Plastic

Dimensions (Height X Max Diameter): 240 x 52 mm (9.45 in. x 2.05 in.)

Microphone Applications: Female Vocal, Jazz, Male Vocal, Rock, Speech

The Electro Voice ULM-21 is a cardioid condenser lavalier microphone featuring a TA4-female connection that is compatible with the Electro Voice RE-1 and RE-2 series of wireless microphone transmitters. The cardioid polar pattern is effective in minimizing noise and ambiance at the off-axis sections of the microphone capsule. The result is high gain-before-feedback response when using near speakers and monitors and minimal general noise.

The Electro-Voice HM7 is a super-cardioid headworn microphone wired with a Switchcraft TA4-female connector for use with Electro-Voice and Telex wireless beltpack transmitters. The HM7 is primarily designed for stage performance application, allowing hands free microphone placement and excellent rejection of audio from stage monitors and adjacent instruments. The frequency response is optimized for reproducing vocals and eliminating low-frequency noise. The adjustable gooseneck enables easy microphone positioning and stable placement. It's miniature, low profile design is ideal for use on stage or in front of cameras.

• TA4-Female Connector The TA4-female connection enables direct connection to Electro-Voice and Telex beltpack transmitter.

• Super-Cardioid Polar Pattern The super-cardioid polar pattern effectively minimizes off axis audio and noise from stage monitors and adjacent instruments.

• Miniature Profile The miniature, low-profile design is ideal for use on stage and on camera.

BPU-2 bodypack transmitter:

The BPU-2 is made from high-impact, ABS plastic. The single on/off switch also functions as a mute, and the TA4 microphone connector is compatible with any of the EV lapel and headworn microphones. A beltclip, smart battery, and unique optimization mode are just a few features that make the BPU-2 the most versatile and easy-to-use transmitter in its class.

Displays Group/Channel, Frequency, or Battery Level

Connector Type TA4M

Antennas External 1/4 wave fixed

Battery Life >8 hours with alkaline typical

Power Requirement 9V Battery

RF Output 30 mW typical

Finish Non-reflecting Black

Case Material High-Impact ABS Plastic

Dimensions (HxWxD) 96.5 x 66 x 23.4 mm (3.8" x 2.6" x 0.92")

System Includes 4 RE-2 Receiver, 1 EV ADP4, 2 Antenna, and your choice of four Handhelds, Lavs or Headsets, Road Case